Metal detector for pipelines METRON 07 FlatLine
The highly sensitive METRON 07 FlatLine gravity free-fall style detector is installed in pipelines transporting free-falling bulk materials.
Thanks to the mesuCAGE technology, the low profile and compact dimensions the METRON 07 FlatLine detector is easily integrable into the existing pipeline. It is often installed under weighing and filling machines. As an option, it can be equipped with a replaceable hopper.
We supply this free-fall style metal detector for pipes with a diameter of 100 – 250 mm as standard.
It is made of stainless steel with an emphasis on hygienic design.There are no dead spots where the material could settle!
This detector is equipped with a first-rate AMD 07 control unit with a range of advanced features, such as a touch screen control panel, so its operation is simple and intuitive. It enables permanent monitoring of electronic and mechanical parts. The mesuNET system arranges for remote maintenance and network integration of the device. The unit is a part of the detector, but can also be placed outside the detector.
The METRON 07 is synonym for metal detectors with the highest detection accuracy and reliability.The detector coil has several layers of shielding and does not require a plastic sensor tube. This makes the detector immune to external electromagnetic interference, allowing for extremely accurate metal detection.
Principle advantages of a gravity free-fall style metal detector
- Metal detector intended for building-in under scales and filling machines. All metal particles are detected and it is both off-shell particles and the ones in the form of inclusions in the end product. Highly exact and reliable detection of metals. Revolutionary simple control. Minimum dimensional requirements.
- It conforms to the quality requirements as per HACCP, IFS, BRC and SQF systems.
- Variable and flexible thanks to the conception of made-to-measure system.
The METRON 05 CI D tunnel metal detector is:
- Reliable – in process and detection
- Durable – in technology and performance
- Comfortable – in design and data management
Optional equipment
The QUICKTRON 07 RH HyQ Clean detectors can be supplied with a wide range of additional equipment:
- Signal units – beacon, buzzer, beacon with siren
- MesuSET – operation of detector via laptop
- MesuNET – network integration and remote maintenance
- Replaceable hopper
- Wi-Fi
- Metal detector test spheres
Special design
Do you have special requirements for a metal detector design? The most common requirements include:
- Explosion proof versions
- Colour design according to requirements
Dimensions
| A: (mm) | B: (mm) | C: (mm) | D: (mm) | E: (mm) | F: (mm) | G: (mm) | H: (mm) | I: (mm) |
|---|---|---|---|---|---|---|---|---|
| 50 | 70 | 86 | 100 | 8xM5 | 220 | 300 | 100 | 180 |
| 70 | 70 | 86 | 100 | 8xM5 | 220 | 300 | 100 | 180 |
| 80 | 120 | 140 | 160 | 8xM5 | 300 | 300 | 154 | 215 |
| 100 | 120 | 140 | 160 | 8xM5 | 300 | 300 | 154 | 215 |
| 120 | 120 | 140 | 160 | 8xM5 | 300 | 300 | 154 | 215 |
| 150 | 200 | 225 | 246 | 8xM5 | 370 | 370 | 203 | 255 |
| 200 | 200 | 225 | 246 | 8xM5 | 430 | 430 | 203 | 255 |
| 250 | 300 | 325 | 360 | 8xM5 | 530 | 530 | 322 | 180 |
| 300 | 300 | 325 | 360 | 8xM5 | 630 | 630 | 322 | 180 |
| J: (mm) | K: (mm) | L: (mm) | M: (mm) | N: (mm) | O: (mm) | P: (mm) | R: (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| 250 | 260 | 310 | - | - | 72 | 4xM5 | 490 | 25 |
| 250 | 260 | 310 | - | - | 130 | 4xM5 | 490 | 25 |
| 330 | 340 | 400 | 35 | 10 | 108 | 6xM5 | 650 | 35 |
| 330 | 340 | 400 | 28 | 10 | 130 | 6xM5 | 650 | 40 |
| 330 | 390 | 450 | 28 | 10 | 150 | 6xM5 | 700 | 45 |
| 380 | 405 | 470 | 36 | 5 | 180 | 6xM5 | 800 | 55 |
| 460 | 605 | 670 | 37 | 5 | 230 | 6xM5 | 1000 | 65 |
| 560 | 605 | 665 | 48 | 5 | 280 | 6xM5 | 1200 | 130 |
| 660 | 805 | 865 | 50 | 5 | 366 | 8xM10 | 1400 | 160 |
We can supply units with different height, inside diameters, frames, etc. to meet your requirements.
We will ask you to specify the required modifications so that the offer can be elaborated exactly according to your requirement.
Metal free zone - MFZ
It is essential for the proper metal detector functioning that there are no fixed (e.g. conveyor structure, its covering) or moving metal parts (e.g. conveyor rollers) in the proximity of the detector’s aperture. Therefore, the MFZ is defined for each detector and it should not contain moving or fixed metals. The aperture of the metal detector is to be placed in the middle of this metal free zone. When you observe the MFZ when installing the detector, you will prevent false alarms and false detections and contribute to the correct detector operation.
Contact us – we will help you with the MFZ calculation for moving and fixed metals.
The great advantage of this metal detector is that a metal-free zone is not required.
Sensitivity of a metal detector
The detector sensitivity depends on many parameters, such as the aperture diameter (the smaller the aperture, the higher the sensitivity), the material speed, the density of the product, its temperature, humidity, etc.
Maximum obtainable sensitivity can be established by testing your product sample in our laboratory. We will perform these tests free of charge. Please contact us, we will discuss the test execution as well as the dispatch of your material samples.17.03.2022
The METRON 07 FlatLine sensitivity diagram:
| Model | 50 | 70 | 80 | 100 | 120 | 150 | 200 | 250 | 300 |
|---|---|---|---|---|---|---|---|---|---|
| Sensitivity – steel ball dia. (mm) | 0,3 | 0,45 | 0,5 | 0,6 | 0,7 | 0,9 | 1,0 | 1,5 | 1,75 |
AMD 07 Control unit
A first-rate control unit is essential for the proper functioning of any detector. Our control unit is made with an emphasis on the high quality of workmanship and components.
The result is a stable control unit with a wide range of functions (just to name a few):
- Communication via Ethernet = unlimited flexibility
- Compact control unit
- Auto-balance including the suppression of interfering signals and automatic sensitivity calibration
- Dynamic auto-tracking – maximum sensitivity in operation
- Multi-filter system using digital filtration for maximum stability in harsh environments
- Self-monitoring system ensures that all important components function properly
- Narrow detection zone provides an accurate location of the metallic particle in the detection field allowing precise separation
- Easy intuitive operation – essential for detector operation
- 5.7" Color display
- Product storage memory backup – for up to 500 products
- Metal detector network and remote service - diagnostics, parameter change, SW update
- USB data media – USB data connection is a standard equipment to store data, carry out easy SW update, upload additional files etc.
Scope of delivery
The delivery of METRON 07 CI detectors includes:
- Detection head
- Control unit (= electronics mounted in a metal cabinet)
- Connecting cables
- Installation hardware
- User manual
- Power supply: 100 – 240 V AC, 50/60 Hz
- Power consumption: max. 75 W
- Type of protection: IP 66
- Min. working temperature: - 10 °C
- Max. working temperature: + 50 °C
- Relative air humidity: 0 – 95 % (without condensation)
- Feed pressure: max. +/- 0,5 bar
- Power cable: 1.8 m with plug
