Magnets for technological liquids TL
Magnet for technological liquids TL is designed for handling parts immersed in various technological solutions - galvanizing or oil bath, paint shop, etc. The location of the magnet on a bar with a handle allows to reach even harder to reach places and and heavier parts.
If you need a lower pulling force of the magnet, we also produce a magnet for technological baths equipped with a weaker ferrite magnet.
The handling rod with a standard length of 1.25 m is equipped with a pivoting joint at the end of the magnet, so that the part can be gripped over the entire surface of the magnet and thus use its maximum pulling force. On request, we can produce a rod in any length.
Magnet for painting shops TL 3/300 N - new type
The magnetic cores are firmly enclosed in stainless steel rods. The surface of the magnetic rods is easy to maintain and washable. There is no risk of damage to the magnetic cores.- Magnetic cores are made of strong neodymium magnets
- The magnetic induction on the surface of the rods is 11,500 G.
- Polished surface of magnetic rods
- Heat resistance of magnets up to 80 °C in standard design
- Stainless steel DIN 1.4301
- We produce magnets for galvanizing plants with three or four rods
Easy placing an order in e-shop
| Cat. number | Type | A (mm) | B (mm) | C (mm) | H (mm) |
|---|---|---|---|---|---|
| TL01N-S | Neodym NdFeB | 110 | 27 | 65 | 1277 |
| TL02F-S | Ferit FeB | 110 | 27 | 65 | 1277 |
| Model | L (mm) | Number of bars | Weight (kg) | Magnetic induction | Surface treatment of the magnetic part | Working temperature |
|---|---|---|---|---|---|---|
| TL 3/300 N | 1830 | 3 | 6,6 | 11 500 G | polishing | up to 80 °C |
| TL 4/300 N | 1830 | 4 | 7,8 | 11 500 G | polishing | up to 80 °C |
| TL P 3/300 N | 2420 | 3 | 7,2 | 11 500 G | polishing | up to 80 °C |
| TL P 4/300 N | 2420 | 4 | 8,4 | 11 500 G | polishing | up to 80 °C |
