Detectable Products Safety and Quality in Production
29. 10. 2024
Detectable products are important for ensuring safety and quality in modern manufacturing processes, especially in the food...
WE ARE SOLLAU
A specialist in field of magnetic separation
Our magnetic separators are featured with a fabrication of quality, attractive design, extensity of application use, high effectiveness of tramp metal removal and acceptable price. We will help you when solving a problem how to remove the unwelcome adulterants coming from products and contribute to the preservation of machinery.
PRODUCTS
The following categories of goods are manufactured and offered by us:
REVOLUTION IN MAGNETIC SEPARATION!
We are introducing the first magnetic separator with fill-level signaling in Europe!
Our separator with ALARM system signals that the magnetic grids in the separator are filled with trapped metals (reducing its efficiency) and need to be cleaned. At the same time, it is clearly visualized that the separator does not need to be cleaned. The operator does not waste time and can concentrate on other activities.
The three-stage light signaling is clear and intuitive:
ASK SEPARATOR WITH ALARM SIGNALING
PERMANENT OVERBAND MAGNETS FOR MOBILE CRUSHERS AND SCREENERS
We have long experience with the production of overband magnets for mobile crushers and screeners.
We have supplied hundreds of magnetic separators to the largest recycling companies worldwide. We are proud to be a supplier of magnetic technologies for leading manufacturers of mobile crushers and screeners.
We have our own development department so we are able to design a separator precisely for you. We take pride in meeting specific customer requirements so that the separator is fully compatible with your mobile line. .
RECOMMENDED MAGNETIC SEPARATORS FROM OUR OFFER
Overband self-cleaning magnetic separators DND-AC
DND-AC is designed to handle product stream with a high content of ferromagnetic particles. It is designed to capture in a quick and easy way valuable ferromagnetic particles from a product stream and at the same time the overband magnetic plate with automatic cleaning protects your machinery that subsequently treat the material.
Chute magnets ML
The inline chute magnet (because of its form also sometimes called “lantern” or external pole magnet) is designed for separation of small ferromagnetic particles from materials of worse bulk and pouring properties (such as cereals, flour, powder, sawdust etc.) that could clog the traditional magnetic grate separators. We deliver the chute magnet in a stainless steel housing that is to be connected to a pipeline in order to become its integral part.
Hopper magnets TM
Magnetic separator for the hoppers of injection moulding machines s designed to separate iron tramp from free-flowing dry materials (such as regranulates, crushed plastic materials, plastic crumb, rejected mouldings etc.). The hopper magnet protects the moulding machines (with standard cone hoppers) and other processing equipment from damage by ferromagnetic particles.
Self-cleaning magnetic grate separators MSSJ-AC
Magnetic grate separator with automatic cleaning is designed to separate in a quick and easy way even the finest magnetic iron contamination from free-flowing substances of good bulk properties and to protect the machinery that subsequently treats these materials. Possibility to replace the individual magnetic bars (= lower repair and service costs)
ARTICLES
The MSS-MC ALARM: Separator with Automated Fill-Level Signaling
21. 10. 2024
The SOLLAU company introduces a revolutionary product in the field of magnetic separation - the MSS-MC-ALARM, the first magnetic...
Light signal cross for closing the airport runway has been successfully tested at Kunovice airport
14. 10. 2024
We have successfully tested our portable light signal cross, designed to close the airport runway, at Kunovice Airport. The...
The second day of Recycling-Technik 2024 is now underway – Come and visit us!
10. 10. 2024
Recycling-Technik 2024 is in its current state. If you are interested in the latest innovations in the field of recycling...
We are launching a Romanian language website
7. 10. 2024
We are very pleased to announce that we have launched the Romanian language version of our websites for our Romanian customers...
SOLLAU at SYMAS & MAINTENANCE Trade Fair
2. 10. 2024
From 6th to 17th October we will participate in the SYMAS & MAINTENANCE Trade Fair in Krakow.
This trade fair is a splendid...
WHY TO COOPERATE JUST WITH SOLLAU?
- We are a Czech manufacturing company following the tradition of Czech mechanical engineering
- We do custom manufacturing tailored to the customer's needs
- We will elaborate a quotation for standard separators within three working days.
- We offer professional advice on magnetic separation and metal detection
We have our own Design and Development Department- We have our own production facilities
- We create products with a modern, contemporary design
- We only use components of renowned brands
- We certify our products (ATEX, HACCP, IFS, pressure tests, attestation of materials, etc.)
- Warranty and post-warranty service
- We test, measure and certify both our own products and third-party products
- Spare parts are available within a short time
- We buy old separators and dispose of them ecologically
- Service within the Czech Republic within 24 hours
- Quality management system ISO 9001:2016
- Our devices will provide you with a competitive edge
CASE STUDIES
JACKAL is in action! Strong, lightweight and immediately available! (case study)
17. 10. 2024
Initial status
The customer is engaged in construction debris recycling.
Problem
During recycling, the demolition waste is crushed to the desired size. After its crushing,...
How to remove 98 % of ferrous contaminants from pulp if the separator is in a difficult-to-access area? (case study)
3. 10. 2024
Initial status
Our customer specializes in the production of cardboard packaging. There are often small ferromagnetic particles in the pulp used for the production of cardboard...
Separation of highly abrasive fragments in a aluminum foundry (case study)
20. 9. 2024
Initial status
Our customer is a manufacturer of aluminum alloys of the highest quality. The alloys find application mainly in the automotive, engineering, electrotechnical...
Affordable tailor-made solution: elimination of complaints in the production of plastic cups (case study)
5. 9. 2024
Initial status
A manufacturer of plastic cups had to deal with a high number of quality complaints. There were 10 to 20 complaints a month caused by metal contamination of...
Separation of ferrous metals from pulp in paper production – removal of 20 kg of wires per week (case study)
8. 8. 2024
Our customer specializes in the production of high-quality pulp and white sulfate paper. This company manufactures a wide variety of products, including kraft paper and environmentally...
How to separate metal particles from fat on a confectionery production line? (case study)
11. 7. 2024
Initial status
One of the leading food manufacturers processes fats for confectionery production. 100 °C hot fat is led through pipes with diameters of 40 and 100 mm.
Problem
WHO DO WE WORK FOR?
The products of our company find the use in a great variety of sectors of industrial production, exploitation or sector of manufacturing industry. They play an important role also in the plants oriented on recycling and environment.
Plastics and rubber industries
Wood industry
Food processing industry
Automotive industry
Chemical industry, paints and lacquers
Cement and lime industry
Mining and quarrying industry
Ceramic and glass industry
Textile industry
Tobacco industry
Production and recycling of paper
Maintenance of airports and roadsc
Thermal power plants
Sanitary and hygienic plants
Pharmaceutical industry
Machining and foundry industry
Recycling and waste processing
Sugar production
RECOMMENDED PRODUCTS FROM OUR E-SHOP
Magnetic pockets
A magnetic pocket with plastic foil ensures easy placing together with the protection of the inserted document in your office, stockroom, or workshop. We offer both standard magnetic pockets and pockets with a colored magnetic frame that adheres to any ferromagnetic surface.
Neodymium magnets
These neodymium magnets are manufactured in various shapes - cylinders, prisms, rings, rods, cones, or spheres. The neodymium magnet excels in very strong adhesion, allowing its use in very small spaces.
Pot magnets
Magnetic lenses include a combination of a cylindrical magnet being placed into a metal housing. This steel housing ensures a big growth of the magnetic holding force of the magnetic core used and protects the magnet from impact, cracking, or disruption at a big temperature change at the same time.
SELECTION FROM REFERENCES
-
Tesla
-
Hyundai Motor
-
Škoda Auto
-
Renault
-
VÚMZ SK
-
Mayr-Melnhof Karton
-
Nestlé
-
IKEA
-
Continental
-
Jokey
-
AZO
-
Knauf
-
Skupina ČEZ
-
Vesuvius
-
Andritz
-
Agrana
-
Laufen
-
Sudzucker
-
Henniges Automotive
-
Netzsch
-
Ytong
-
Schenck process
-
Tereos
-
Nordzucker
-
Engel
-
Zeppelin
-
Mondeléz
-
DSM
-
Hitachi Zosen
-
Lafarge-Holcim
-
KraussMaffei
-
Bosch
-
Siemens
-
BASF
-
REHAU
-
Brammer
-
Duravit
-
Terex
-
Südwestdeutsche Salzwerke
-
Sunoko
-
Synthesia
-
Suez
-
Promasidor
-
JUTA
-
Liberty Steel
-
Mondi
-
Egger
-
Kronospan
-
Stora Enso
-
Klaus Timber
-
Serafin Campestrini
-
BEUMER Group
-
Heizomat
-
FLSmidth
-
Siempelkamp
-
Hachez